Getting Started
Installing and setting up the Interceptor PoE Board
Interceptor PoE Board
8-port PoE+ expansion board for the Interceptor Carrier Board
less than a minute
The Interceptor PoE Board adds 8 PoE+ (IEEE 802.3at) ports to your Interceptor Carrier Board. Connect up to two PoE boards for a total of 16 managed PoE ports.
Key Features
| Feature | Specification |
|---|---|
| PoE Ports | 8x RJ-45 with PoE+ |
| PoE Standard | IEEE 802.3at (PoE+) |
| Power per Port | Up to 30W |
| Connection | 40-pin FFC to Carrier Board |
| Controller | IC Plus IP808AR |
| Dimensions | 100mm x 68mm |
Configurations
| Setup | PoE Ports | Connection |
|---|---|---|
| Single Board | 8 ports | Carrier J9 |
| Dual Boards | 16 ports | Carrier J9 + J10 |
Applications
- IP Camera Systems - Power and connect surveillance cameras
- WiFi Access Points - Deploy PoE-powered access points
- IoT Devices - Power sensors, controllers, and edge devices
- VoIP Phones - Power desk phones without separate adapters
Quick Links
- Getting Started - Installation guide
- Specifications - Technical specs
- PoE Control - Software commands
- Troubleshooting - Common issues
- FAQ - Frequently asked questions
Requirements
- Interceptor Carrier Board v2.0
- VOITA 48Vdc Power Converter
- ATX PSU with adequate 12V capacity
- exaviz OS (2025-05-01 or newer for
/proc/psesupport)
Resources
Specifications
Technical specifications for the Interceptor PoE Board
PoE Control
Software commands for managing PoE ports
Troubleshooting
Common PoE board issues and solutions
FAQ
Frequently asked questions about the Interceptor PoE Board
Last modified December 30, 2025