Getting Started
Initial setup and configuration of the Interceptor Carrier Board
2 minute read
The Interceptor Carrier Board is a Mini-ITX form-factor carrier board designed to convert a Compute Module (CM4/CM5) into a powerful Network Attached Storage (NAS) or Network Video Recorder (NVR) system. It features a built-in managed switch, SATA controller, and expansion capabilities for Power over Ethernet (PoE).
| Feature | Specification |
|---|---|
| Form Factor | Mini-ITX (100mm x 110mm) |
| Storage | 5x SATA ports (RAID 0, 1, 5, 6, 10 via JMB585) |
| Networking | 4x Gigabit Ethernet (RTL8367RB managed switch) |
| Video | 2x Full-size HDMI 2.0 (4Kp60) |
| USB | 2x USB 2.0 Type-A + 2x USB 2.0 via header |
| Expansion | 2x FFC connectors for PoE boards (up to 16 ports) |
| Power | 24-pin ATX connector |
| Other | Micro SD card slot, RS-485, RTC with battery backup |
Initial setup and configuration of the Interceptor Carrier Board
Complete technical specifications for the Interceptor Carrier Board v2.0
Connector pinouts and hardware interface details
Adding PoE boards and expansion options
Operating system and driver information
Common issues and solutions for the Interceptor Carrier Board
Frequently asked questions about the Interceptor Carrier Board
Last modified December 30, 2025